|Home||» Products||» Industrial Solution||» FRP Cable Tray|
FRP Cable Trays
Fiberglass Ladder Type Cable Trays
Fiberglass Ladder type cable trays are offered be assembling different types of combinations of pultruded cross sections, side runners & rungs.
The Rungs are epoxy bonded and fastned to demonstrate high strength against point, side & uniform loads.
Ladder type cable trays are designed for support span of 3000 mm.
ladder type cable trays are designed for a point load of 70 kgs and uniform load with factor of safety 1.5 to 2.0.
|Width||Side Runner Ht.||Rung Width||Design Load UDL||Material|
|100mm||77 / 100 / 150||50mm||10kg / mtr.||Polyester / Viny ||
|150mm||77 / 100 / 150||75mm||12kg / mtr.||Polyester / Viny ||
|200mm||77 / 100 / 150||100mm||15kg / mtr.||Polyester / Viny ||
|250mm||77 / 100 / 150||150mm||18kg / mtr.||Polyester / Viny ||
|300mm||77 / 100 / 150||200mm||25kg/mtr.||Polyester / Viny ||
|400mm||77 / 100 / 150||300mm||30kg/mtr.||Polyester / Viny ||
|450mm||77 / 100 / 150||450mm||40kg/mtr.||Polyester / Viny ||
|500mm||77 / 100 / 150||500mm||45kg/mtr.||Polyester / Viny ||
|600mm||77 / 100 / 150||600mm||50kg/mtr.||Polyester / Viny ||
Fiberglass Perforated Cable Trays
FRP/GRP cable trays made by FTC is fabricated out of different pultruded sections of advanced polyester & vinelester resins, manufactured by automatic pultrusion machine. FRP/GRP cable trays are good replacement of G.I/M.S cable trays, which tend to corrode, erode and spread heat thus leading to power interruptions. On the other hand FRP cable trays safe, durable, cost effective and easy to install. FTC manufactures these cable trays as per NEMA/BIS/Consultants Specification.
Standard specification is available as per below table
|Inside Width||Load Design||Material Choice|