Cookie Img
Send Inquiry
Home » Products » Construction Solution » FRP Door Frames

FRP Door Frames

FRP Door Frames
FRP Door Frames
Product Code : 124
Product Description

FRP Door Frames

ZEN introduces the most convenient and elegant way to install door chaukhat frame, 'ZEN' door frames are available in CKD condition to enable you to erect, install whenever & wherever you need. Ready to use, pre finished. ZEN door frames are available in different colour and finishes and can be made in different sizes and styles as per requirement.

 Salient Featured:-

  • Ready to use, pre finished.
  • Functional
  • Elegant
  • Long lasting
  • Easy to install
  • Unique design
  • Light weight
  • Easy to clean
  • Maintenance free
  • Water proof, termite proof
  • Fire retardant
  • Scratch resistant surface
  • Easy to fix normal hardware / fittings like hinges, mortise lock, door closer etc.
  • Being sandwiched paneled, heat and sound insulate.
  • No need for seasonal treatments as required for hard wood.
  • Can be repainted with PU coatings or DUCO paint at site after few years of use if desired.

Specification:-

Standard Sizes

  • 900 x 2100, 800 x 2100, 750 x 2100
  • 900 x 2000, 800 x 2000, 750 x 2000

Range

Rose wood

Mahogany

Boverian beech

Teak

Fabrication Guideline:-

Fabrication Guideline - ZEN DCF - 01 (FP - 10030)

  • Join two length of FP 10015 using Fevikwik and solvent adhesive. Additional bonding strength is provided by using silicone sealant or Fevicol SP5 epoxy sealant.
  • Cut joined section as per required length for vertical stile 2 pcs. & horizontal stile 1 pc.
  • Fix Gl ' J ' stiffener 25 x 19 x 8 in the hollow spaces as shown.
  • Fix' L ' shaped corner pcs. (2 nos.) With zinc coating (90 x 75x75)
  • ZEN door chaukhat frame should be fixed after plaster work & flooring is completed.
  • Fix the frame to the wall using expandable type fischer screws with sleeve or roll plugs & sheet metal screws csk 75x10 size.
  • Press fit the Tee profile FP 2519 in the groove.
  • Low tack adhesive protective film should be fixed on surface of frame to protect surface from scratches.
  • Use the supporting bar at bottom side of frame for maintaining frame in perfect plumb line.
  • Fill up the gap between frame & wall with fevicol mixed white cement.
  • Fix corner molding FP 1515 to the frame casing solvent adhesive / fevikwik to provide elegance & close gap if any.

Fabrication Guideline - ZEN DCF - 02 (FP - 11034)

  • Cut horizontal stile on both ends as per required length using standard fixture to match contour of profile FP 11034 while joining vertical stile (2 pcs.)
  • Fix the vertical & horizontal stiles using 25 x 4 csk screws.
  • Fix the special Gl stiffener on back side of vertical & horizontal stile using 13x4 csk screws.
  • Fix ' L ' shaped corner pcs. (2 nos.) with zinc coating (90 x 75x75)
  • ZEN door chaukhat frame should be fixed after plaster work & flooring is completed.
  • Fix the frame to the wall using expandable type fischer screws with sleeve or roll plugs & sheet metal screws csk 75x10 size.
  • Screws cap of different colour can be applied on fixing screws.
  • Low tack adhesive protective film should be fixed on surface from scratches.
  • Use the supporting bar at bottom side of frame for maintaining frame in perfect plumb line.
  • Fill up the gap between frame & wall with fevicol mixed white cement.
  • Fix corner molding FP 1515 to the frame casing solvent adhesive / fevi kwik to provide elegance & close gap if any.

 



A/37/GF, Amrapali Mall, Near Havmor Hotel, Ambli Bopal Cross Road, Ahmedabad - 380058, Gujarat, India
Mr. Mukesh Thakkar (Proprietor)
Send Inquiry


Buyers Helpdesk

Let tradeindia.com find Quality Suppliers for you!

I agree to abide by all the Terms and Conditions of tradeindia.com
ZEN ECO HOMES All Rights Reserved.