Cookie Img
Send Inquiry
Home » Products » Industrial Solution » PPR Pipes

PPR Pipes

PPR Pipes
PPR Pipes
Product Code : 126
Product Description

PP-R Pipe & Fittings

PP-R Introduction

PPR…a versatile, and comprehensive system for water and other fluid delivery, is used in applications of pressurized warm or cold water in all modern residential, commercial, and industrial application.

PP-R An Ideal Solution

PPR pipes and fittings are designed to withstand constant temperature up to 700 C. The service life expectancy depends on the installed system pressure and pressure changes. Even though the service life expectancy of the pipe is more than 50 years a permanent temperature rise from 700 C to 900 C will accordingly reduce the operational life of the pipe. However, a temperature rise up to 1000 C in short time frames is usually unproblematic.

Fusing tool

The pipe and fittings in type three PP-RC piping system are connected through thermal fuse plugging. The thermal fusing tools are applied to melt the inner & outer surfaces of the fitting and pipes simultaneously and plug connect them under the specified temperature and condition. The two pats are integrated uniformly and firmly when cooled. The connection provides good sealing, high reliability and avoids any leakage. See the table for fusing connection technical requirement.

Installation technical precaution

  • When temperature drops under 0°C in winter, precaution must taken to prevent possible cracking of pipes if the pipes are hit by external force.
  • The pipe shall be away from heat when stored for long time, direct sunshine shall be avoided during product transportation or storage
  • PP-RC pipe has big away expansion coefficient, technical measures must be taken to prevent the thermal deformation of the pipes during the exposed or covered pipe layout.
  • One support or hanger (pipe buckle seat) must be installed every 400mm in exposed layout or non-liner covered layout.
  • During installation, relevant design & installation codes must be followed, the construction workers must be trained and carry their certification badges at work.

Fusing Connection Procedure

  1. Pipe cutting off. The pipes must be vertically cut off with pipe cutter , the uneven edges must be trimmed after cut off.
  2. A mark shall be made at the depth of pipe insertion (equal to slip in depth of adaptor)
  3. Heat up the entire insertion part on welding tools, including pipes and fitting.
  4. When the heating is over, insert the pipes into adaptor stably and evenly to from solid and perfect joint.
Why PP-R???
  • Exceptional corrosion & erosion resistance
  • High chemical resistance
  • Low Thermal Conductivity
  • Anti-Fungal & Non-toxic
  • Leak-proof & airtight homogenous joints
  • Negligible head loss, Minimum Pressure loss & Higher Flow Rate
  • Inherited characteristic of high impact strength
  • Wide Temperature range: -4°C to 95°C
  • Very low thermal loss
  • Trouble-free installation proceed & light in weight
  • Long Service life
  • Highly economical
  • Superior Impact, Fracture Resistance & Minimum Crack Transmission
  • PPR being an Eco-Friendly product does not catches fire straightforwardly, indeed in case of fire it doesn’t produce toxic gases

Technical Data:-

Technical parameter for fusing connection

Pipe outer diameter(mm) Fusing depth (mm) Heating time (second) Inserting time (second) Cooling time (second)
20 14 5 4 2
25 15 7 4 2
32 1.65 8 6 4
40 18 12 6 4
50 20 18 6 4
63 24 24 8 6
75 26 30 10 8
90 32 40 10 8
110 38.5 50 15 10
160 56 80 20 15

Pipes and Fittings:-

MOC: PP/HDPE/PVDF/PPH

  • Other Fittings also available on request
  • All pipe fittings are As per IS Standards
  • Maximum working pressure 10kg/cm square
  • Also available Pipe fittings in Pressure PN 12, PN 12.5, PN 16 and PN 20 on request
  • Final technical & dimension detail confirm as & when required

 FUSING TOOL

INTRODUCTION :- 

  •  The pipes and fittings in Type three PP-RC Piping systems are connected through thermal fuse plugging. the thermal fusing tools are applied to melt the inner & outer surfaces of the fitting and pipes simultaneously and plug connect them under the specified temperature and conditions. the two pats are integrated uniformly and firmly when cooled.The connection provides good sealing. high reliability and avoids any leakage. See the table for fusing connection technical requirement.

INSTALLATION TECHNICAL PRECAUTIONS 

  • When temperature drops under 0 (zero)  C in winter, precaution must take to prevent possible cracking of pipes if the pipes are hit by external force.

  • The pipe shall be away from heat when stored for long time, direct sunshine shall be Avoided during product transportation or storage.

  • PP-RC pipes has big expansion coefficient , technical measures must be taken to prevent the thermal deformation of the exposed or covered pipe layout.

  • One support or hanger ( pipe buckle seat ) must be installed every 400mm in exposed or non-linear covered layout.

  • During installation, relevant design & installation codes must be followed , the construction workers must be trained and carry their certification badges at work.

FUSING CONNECTION PROCEDURE

  1. Pipe cutting off. The pipes must be vertically cut off with pipe cutter, the uneven edge must be trimmed after cut off.

  2. A mark shall be made at the depth of pipe insertion (equals to slip-in depth of adaptor)

  3. Heat up the entire insertion part on welding tools, including pipes and fitting.

  4. When the heating is over , insert the pipe into adaptor stably and evenly to form a solid and perfect joint.

TECHNICAL PARAMETER FOR USING CONNECTION

Pipe outer diameter(mm)

Fusing depth (mm)

Heating time (second)

Inserting Time (Second)

Cooling time (Second)

20

14

5

4

2

25

15

7

4

2

32

16.5

8

6

4

40

18

12

6

4

50

20

18

6

4

63

24

24

8

6

75

26

30

10

8

90

32

40

10

8

110

38.5

50

15

10

160

56

80

20

15

 



A/37/GF, Amrapali Mall, Near Havmor Hotel, Ambli Bopal Cross Road, Ahmedabad - 380058, Gujarat, India
Mr. Mukesh Thakkar (Proprietor)
Send Inquiry


Buyers Helpdesk

Let tradeindia.com find Quality Suppliers for you!

I agree to abide by all the Terms and Conditions of tradeindia.com
ZEN ECO HOMES All Rights Reserved.